I replaced impeller with gaskets poppet valve still will not pee any water on ear muffs any ideas why this is happening. Was working fine went to limp mode and alarm going off 4 days ago.
I replaced impeller with gaskets poppet valve still will not pee any water on ear muffs any ideas why this is happening. Was working fine went to limp mode and alarm going off 4 days ago.
Check to make sure the keyway is in the impeller, and that the vanes are rotated in the correct direction.
Click on this >>>>http://www.bassboatcentral.com/sttipswp2.htm
As an added step, hook up hose to flushing port and run a pipe cleaner or piece of sting trimmer line in and out to make sure there is no obstruction.
Please see the Forum Announcements, and provide the REQUIRED info when posting. Thank you!
Water pressure AT IDLE?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Last edited by Bassed3; 02-22-2018 at 06:15 PM.
pull poppett start up preferably not on hose [no water at poppett] pull pump again, pay close attn. to plate make sure its not bent from seal carrier pushed upwards burning impeller bottom
.................................................. ...the scariest thing in life is the unknown ...................................
Just wanted to thank u guys for ur help got it going went and bought another kit and that fixed it guess there was some defect to the first one.