Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Apr 2014
    Location
    Detroit & Traverse City, MI
    Posts
    1,334

    anyone running a Crestliner1650 fishhawk?

    Hoping....shot in the dark....I have a 16.5ft. crestliner fishhawk with a df70 suzuki 4stroke.....Not expecting anyone to have my setup just looking to find out a better option on props.....mine blows out ANYTIME i take a turn at mid to higher RPM's. I am just looking for a solution to this (prop issue?). thanks.
    You should know that in bee tending if you don't shut your trap the bees will get out.

  2. Member Waxy's Avatar
    Join Date
    Feb 2013
    Location
    Calgary, AB, Canada
    Posts
    67
    #2
    My Brother in law has a 1650 Fish Hawk, but he's got a 90 Merc 4 stroke on it.

    Is your current prop stainless or aluminum?

    Pitch?

    RPM at full throttle?

    Motor mounting height?

    Trim down before turning?

    Need some info on those factors before anyone can give you good advice on optimizing your setup or a replacement prop.

    Waxy

  3. Member
    Join Date
    Apr 2014
    Location
    Detroit & Traverse City, MI
    Posts
    1,334
    #3
    Quote Originally Posted by Waxy View Post
    My Brother in law has a 1650 Fish Hawk, but he's got a 90 Merc 4 stroke on it.

    Is your current prop stainless or aluminum?

    Pitch?

    RPM at full throttle?

    Motor mounting height?

    Trim down before turning?

    Need some info on those factors before anyone can give you good advice on optimizing your setup or a replacement prop.

    Waxy
    thanks. a warm day is coming up I will have more info. then. thanks again.
    You should know that in bee tending if you don't shut your trap the bees will get out.