What size is the threaded hole in the helm 1/8 npt or 1/4 npt or something else. I'm at work trying to rig up a one man bleeding system. It is on a triton so I think it is a sea star system.
What size is the threaded hole in the helm 1/8 npt or 1/4 npt or something else. I'm at work trying to rig up a one man bleeding system. It is on a triton so I think it is a sea star system.
looking at the o-ring size of .110 i would say it's 1/8.
2020 Ranger Z519 | 2020 Mercury Pro XS 225 4S | Helix 10SI | Helix 10 MDI G3N | Helix 10 MDI G3N | Noco GENIUS 10X4
Fury 3 22P True Pitched | Power Pole Pro 2's | Ghost TM | Mega 360 | MEGA LIVE | Atlas 8in Jack Plate | Trick Step | 3X Amped 80ah Lithiums
thanks for the response, that is the size I thought it was.
You don't need an auto fill provision at the helm but I guess it could help. I use an old Sea Star bottle with the bottom cut off, and clear tubing run from the bleeder to the cap, hung upside down above the steering ram. I work it back and forth until there's no bubbles in the line then cap it off and do the other side. Works for (one man) me.
Of course keep the helm full.