Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
Bluewater kit
Are you guys never adjusting the height of the trolling motor? How can you slide the shaft up or down with all those clamps on it?
But if you use your method with tape you can? Is the slot big enough to hold and hdi cable?
The steering box won't pass over tape either. Just secure it very well at both ends. It is possible to place a few dabs of marine grade adhesive in the slot to help keep cable inside,--.if placed in the right spot as to not interfere with sliding..
Not sure of the diameter of HDI cable but my h-bird helix 10 with SI fits fine.
Thanks.
Humminbird cables work fine Lowrance dont based on experience with my old Terrova
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
How far? Not much.