Attaching transducer cable to trolling motor

[Javelin 180]

I did a search and couldn't find anything I'm sure this has been covered somewhere finally after 2 months got my mega trolling motor ducer from Humminbird what is the best way to connect it to my trolling motor I've always have used zip ties but I've read they can cut into the cable didn't know if they made some kind of clips or what any help would be appreciated.

[marlinpruett]

Which motor?

[Javelin 180]

Which motor?

Maxxum

[einsteins]

If you use zip ties along the shaft I recommend a couple of wraps of black tape to keep the zip tie from damaging or cutting into the cable.

[ezfishn]

Either use some tape underneath the tie or use Velcro ties.

[Wayne P.]

I did a search and couldn't find anything I'm sure this has been covered somewhere finally after 2 months got my mega trolling motor ducer from Humminbird what is the best way to connect it to my trolling motor I've always have used zip ties but I've read they can cut into the cable didn't know if they made some kind of clips or what any help would be appreciated.

When you use the plastic cable ties, put the lock where the cable is so you can't crush the cable when tightening. You also don't have the forcibly tighten the ties, snug is good enough.

[Shakey Head1]

I did a search and couldn't find anything I'm sure this has been covered somewhere finally after 2 months got my mega trolling motor ducer from Humminbird what is the best way to connect it to my trolling motor I've always have used zip ties but I've read they can cut into the cable didn't know if they made some kind of clips or what any help would be appreciated.

Some board member came up with these and i used them, they are great.

http://www.cobraties.com/flexroute.html

[J Risco]

When you use the plastic cable ties, put the lock where the cable is so you can't crush the cable when tightening. You also don't have the forcibly tighten the ties, snug is good enough.

Keep it simple

[Javelin 180]

Thanks for the help guys

[einsteins]

Some board member came up with these and i used them, they are great.

http://www.cobraties.com/flexroute.html

This is brilliant!

I need these, looks like you have to order them in bulk... Do you know what size they used?

Thanks

[einsteins]

Some board member came up with these and i used them, they are great.

http://www.cobraties.com/flexroute.html

What size did you get for these?
Thanks

[buster502]

i have never cut a cable in 40 years,i have really never seen this as a problem but them clips do look nice

[Bradrodfish]

Shakey Head1 You have a very nice set man. I bet you can see a worm on a fish at 300 ft.

[basser38]

3m rubber electrical tape..

[C.Warrix]

You can buy the Cobra Flexroute shown above on ebay

[TroyBoy30]

you can get them on amazon in small bags

[buster502]

what size are you using ???

[akaslyguy]

I used the FLEXROUTE XL for my Helix MEGA transducer cable. Worked great.

[buster502]

i can not find the xl model,where did you get the xl

[akaslyguy]

i can not find the xl model,where did you get the xl

http://www.cobraties.com/flexroute.html