New 920 home today

[Phoenix Jim]

Well the long wait is over and I brought my new 920 home today and the wait was worth it. Really like the layout of the boat and the ultrex as well has the solix 12’s. I read where someone said the trick step is bolted on by the factory but mine was welded which is nice. Not been on the water yet but the boat sure pulled nice on the 3 hour drive. Only issue is one battery appears bad as it won’t charge up stays red. To tired to check it now but can’t wait till the ice melts!

[vausoner]

Yea he made a post on here awhile back about all the new steps would be welded from the factory.

[Tom Edwards]

Congrats. Have lots of fun with it. Double check the wiring to the batteries. On my boat the mechanic wired ONE bank to BOTH electric motor batteries.One bank wasn't wired to anything. So I had to fix that. If the wiring is proper, and the battery doesn't charge up over the next 2 days, load test the battery.

[Phoenix Jim]

Also looking at the bow roller the big end caps may be fine as they appear to not even touch the boat

[fxphil]

what no pics?

[Phoenix Jim]

what no pics?

You will see it in person

[Ozark Phoenix]

[BigSexyPhoenix]

I just saw the pic on Facebook. That’s one sharp boat. Congrats.

[DREWTICK]

Congratulations Jim, when you get some nice pictures send them to me and i will post them on my Phoenix Website

[sdendy]

Jim check your connection where the in line fues are Yellow Connectors where they tack the wires up sometimes it will separate ever so slightly making it look okay but not be all the way together. I had to keep pushing mine back together after trailerin etc. I finally figured out the wires did not have quite enough slack.

[vausoner]

Jim check your connection where the in line fues are Yellow Connectors where they tack the wires up sometimes it will separate ever so slightly making it look okay but not be all the way together. I had to keep pushing mine back together after trailerin etc. I finally figured out the wires did not have quite enough slack.

That has happened to me a few times but mine always flashed red when it did that.

[Jeff from Iowa]

Congrats. If it’s a 10 amp charger look after 24 hours.

[Gnute]

She is a looker. Congrats

[shimanogloomis man]

Well the long wait is over and I brought my new 920 home today and the wait was worth it. Really like the layout of the boat and the ultrex as well has the solix 12’s. I read where someone said the trick step is bolted on by the factory but mine was welded which is nice. Not been on the water yet but the boat sure pulled nice on the 3 hour drive. Only issue is one battery appears bad as it won’t charge up stays red. To tired to check it now but can’t wait till the ice melts!

If you don’t mind me asking who did you buy from ?

[KnotEnuff]

Congratulation, warm weather is coming.....

[Phoenix Jim]

If you don’t mind me asking who did you buy from ?

shopped with five different dealers before choosing Ozawkie boats in Kansas and very happy.

[Phoenix Jim]

Organizing the boat today and reading up on everything. Battery is in fact fine and needed charged overnight. It was probably down a bit from dealer playing with solix units. Also appears those sportsman chargers are pretty nice and those solix units are going to take a bit getting used to

[Jeff from Iowa]

I use a secondary additional charger on my starting battery don’t will be charged over night.

[shimanogloomis man]

shopped with five different dealers before choosing Ozawkie boats in Kansas and very happy.

Ok thanks enjoy your new Phoenix!!

[920screaming250]

awesome