Quality Tool holder

[einsteins]

I am looking a for a nice quality tool holder for my boat

Any out there that you guys find to be above the rest?

Thanks

[Bassinracer]

I am looking a for a nice quality tool holder for my boat

Any out there that you guys find to be above the rest?

Thanks

We've got a nice billet tool holder you can drive over with your truck, check them out at

https://www.trickstep.com/product-pa...older-polished

[jml]

Looks nice Mark, looking forward to using my trickstep.

[FishinDad]

I didn't like how much a tool holder stuck out from the side of my console so I used a magnate. https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Then I put a piece of adhesive backed rubber underneath to keep the tools from scratching the gel
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

[einsteins]

We've got a nice billet tool holder you can drive over with your truck, check them out at

https://www.trickstep.com/product-pa...older-polished

Like your steps also, didnt see one for a Z7 trailer...

[mulligans]

Hard to beat a leather sheath zip tied to the seat post.

[fastman151]

I didn't like how much a tool holder stuck out from the side of my console so I used a magnate. https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Then I put a piece of adhesive backed rubber underneath to keep the tools from scratching the gel
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Like this setup!!!!

[Bassinracer]

We've got it, just haven't added it to the website, I need to get with my web guy and make some additions. The step you'll want is the same step that fits the 21 fx Skeeter.

[einsteins]

We've got it, just haven't added it to the website, I need to get with my web guy and make some additions. The step you'll want is the same step that fits the 21 fx Skeeter.

That works with the swing away tongue?
This is 2011 Nitro Z7 Trailer.

Thanks

[FishinDad]

Like this setup!!!!

Thanks. It works nice and clean. I always know where the pliers and scissors are��. Ive thought about getting a couple more magnates to install on the lids of my compartments for drying out cranks, jigs, etc.

[mikesxpress]

$42 for a tool holder?????

[Bassinracer]

That works with the swing away tongue?
This is 2011 Nitro Z7 Trailer.

Thanks

Yes, you just swap the pin and the bolt in the swing away and let it swing towards the port side.

[Bassinracer]

$42 for a tool holder?????

Pretty cheap for something that will out last your boat, before manufactures started incorporating them in boat's, I had several tour pros, both FLW and BASS using them. It's machined from a solid chunk of Billet 6061. Shipping is 7 bucks but that's included in the 42 dollar price. Not for everyone, I guess that's why they make 10 foot jon boats and 100,000 Icons, something for everyone.

[SteezMacQueen]

I didn't like how much a tool holder stuck out from the side of my console so I used a magnate. https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Then I put a piece of adhesive backed rubber underneath to keep the tools from scratching the gel
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1

Would be nice, but all my fishing tools are aluminum and stainless....neither can be used with a magnet.

[nitro3847]

It would be nice if the tool holder had a slot for a ruler