2013 250 Pro XS - what is the size of the nut? Going to buy a socket to keep in the boat in case I need to swap a prop on the water one day.
2013 250 Pro XS - what is the size of the nut? Going to buy a socket to keep in the boat in case I need to swap a prop on the water one day.
They make a universal prop wrench kit.
See attached.
https://www.wholesalemarine.com/attw...RoCA0gQAvD_BwE
2001 196 Elite- 200hp Optimax
Believe it is 1 1/16th inch. Or a 27mm metric socket. I always go 6pt on every socket I own. except for a few specialty cases like mercury rod cap bolts that need 16pt.
2008 Bass Cat Pantera Classic
2014 Mercury Pro XS 200
It is a 1 1/16 and you will need a deep socket.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
+1 on a Deep Socket and an old Ratchet. And that's just for short-term or emergency use (you're going to use a TORQUE wrench to properly install the propeller).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
keep an old 1/2" brake over bar with 1-1/16 deep socket and small stop block with the spare prop in my boat. have changed props on the water more than once.
^^^^Me too.^^^^