Thread: C-Monster App

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2018
    Location
    Georgia
    Posts
    2

    C-Monster App

    I'm hoping the Power Pole Tech will see this post.
    I just bought a MLF rigged Nitro z18 and it came with 2 8ft Blades. Everything works good so far but the C-Monster app won't upload firmware. I get the error that says the file is too large. How can I get the firmware updated and is it really necessary????

  2. BBC SPONSOR
    Join Date
    Jan 2007
    Location
    Tampa, FL
    Posts
    342
    #2
    Try deleting and downloading the app again. You can also try to connect to one pump at a time and see if that helps. This is a known issue with the iOS app that we are working on.

    Are you having trouble with the units? I would guess that the software should be up to date on those boats as we have not release a CM1.0 firmware update in some time now.

    If you continue to have trouble, please call our tech support line at 813-689-9932 opt 2.

  3. Member
    Join Date
    Aug 2012
    Location
    Anniston, AL
    Posts
    203
    #3
    Quote Originally Posted by PowerPoleTech View Post
    Try deleting and downloading the app again. You can also try to connect to one pump at a time and see if that helps. This is a known issue with the iOS app that we are working on.

    Are you having trouble with the units? I would guess that the software should be up to date on those boats as we have not release a CM1.0 firmware update in some time now.

    If you continue to have trouble, please call our tech support line at 813-689-9932 opt 2.
    I had the same issue as the OP, and contacted power pole, they gave me the same advice and now it works great.

  4. Member
    Join Date
    Feb 2018
    Location
    Georgia
    Posts
    2
    #4
    Worked like a champ....Thanks for the assist!!

Tags for this Thread