I just purchased a 361 in caramel and nutmeg colors. It’s my first bass boat and while it’s frozen here I’d like to upgrade from what I believe is a 1990 minn Kota tm. I called Minn Kota and they recommend a terrova 55lb with a 50 some inch shaft. All my fellow bass friends have either 80 or 100+ lb thrust and tell me a 55 wouldn’t move a thing in current or wind. Any ideas from you guys? I’ll try and post some pics of boat tomorrow. All I have is dealer photos right now. Thanks guys
80lb will be fine,a 112 even better, with everybody buying the ultrex there is some steals on 80-101-112 i would put a 45 inch shaft
If funds were not object, I would put a 80 Ultrex on it and never look back..................you will love it..........................JMHO.................. ..........RR
"Never argue with an idiot; He will beat you to death with stupidity"
Thanks guys! I’ll look for an ultrex
Whichever model you choose, go with 24 volt and at least 80 pound thrust.
"The man of system is apt to be very wise in his own conceit; and is often so enamored with the supposed beauty of his own ideal plan of government that he cannot suffer the smallest deviation from any part of it…He seems to imagine that he can arrange the different members of a great society with as much ease as the hand arranges the different pieces upon a chessboard.” Adam Smith, The Theory of Moral Sentiments
I have an 80 Fortrex on my 373 and it is fantastic. The only thing I don't like about the Fortrex is it sits a bit higher when in the stowed position.
1987 Ranger 373V 150 Yamaha proV still going strong.
I bought a 1988 360V a couple of years ago and it too had the original 1988 Minn Kota on it. I found a smoking deal on a Maxxum 65 and mounted that on the boat and have not regretted it. HOWEVER, if I were to stumble upon an extra 2K laying around, I would jump all over that 80 Ultrex in a second!!
"Cast Everything in the Best Light Possible"
Found a guy selling a maxxum 80 used for 2 seasons for 350. Hardly looks used so if he responds I’ll more than likely throw that on. I would love a ultrex but holy moly. I buy that and the lady makes me eat it.
24v 80# 45" shaft
I had a 1990 that I put on the 80lb Maaxum Pro with lift assist to replace the 65lb that was on it when I bought it. Get an 80 Fortrex or Ultrex and you should be good to go.
I have a 80# ultrex worth every penny.
2018 Ranger z520L
2020 250 Pro XS
2B694324
I have a 92. 361 v. Has a 101 2v....80 ultrex is next
80 ultrex or 80 fortrex id stay 24 volt
I have a Maxxum 70, variable speed on my 364 and it does a great job.
Had a 70# maxxum on my 91 361. Liked it fine. Installing an 80# ultrex this weekend. 45” shaft.
So I ended up buying a terrova 101 with ipilot for 500. They guy was an older gentleman and he said he hardly got to use it due to a back injury that forced him to get an ultrex. Question is since the boat is set up for 24v is there much I would need to go 36 other than a jumper? Also it comes with the quick release plate and I’m kinda stumped on how exactly I’m going to mount that with the bows light plug being right there. Any recommendations?
Also I have a minn Kota service center cutting the shaft to whatever size I want. Is 45 the absolute largest you would go or would a 52 be better?
The 45 is fine on mine. I would however like to have a chance to try the 52. When I'm on spot lock in moderate waves I have to stand close the front to keep the motor in the water.
Edit
You won't need group 31 size batteries.
2018 Ranger z520L
2020 250 Pro XS
2B694324
I have a MG Tour 70 lb thrust and it works perfectly for my 375V
Had a 55# MG on my 1990 362 since 1995. Just installed a gently used Tour 82 / 45" shaft. Had to rework wiring for straight 24 volt and replace the 40amp breakers for a single 50 amp per MG. For the heavy old 18 foot Rangers I wouldn't go less than 70 lb thrust.
Reply With Quote
