Results 1 to 11 of 11
  1. #1
    Member jdupre's Avatar
    Join Date
    Apr 2012
    Location
    Bourg, Louisiana
    Posts
    1,710

    Dome stickers are discolered....

    anyone have this issue ? I'm not sure what to spray on them to get them white again. I don't want to put anything on them that may mess anything up. Just doesn't look very good when the rest of the boat is shining and the BIG Nitro Z7 sticker are yellowish. any suggestions ??
    721 ​ProXp


  2. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,459
    #2
    White stickers? The clear coat on the stickers can get hazy. I wonder if u could buff it out.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team

  3. Member
    Join Date
    Aug 2009
    Location
    Dover, Ohio
    Posts
    5,341
    #3
    I doubt they can be buffed...that top layer is going to be vinyl.
    Does your boat set outside when not in use?

  4. Member
    Join Date
    Feb 2014
    Location
    Scottsburg indiana
    Posts
    440
    #4
    try some Bar keepers friend but make sure you wax to any place it touches. I had a old runabout that the bottom had turned kinda yellow that stuff made it paper white

  5. Member jdupre's Avatar
    Join Date
    Apr 2012
    Location
    Bourg, Louisiana
    Posts
    1,710
    #5
    It doesn't sit outside, It seems to be water stain. I can scrub the hull I just didn't want to scrub hard on the sticker and ruin it.
    721 ​ProXp


  6. Member jdupre's Avatar
    Join Date
    Apr 2012
    Location
    Bourg, Louisiana
    Posts
    1,710
    #6
    Quote Originally Posted by BMCD View Post
    White stickers? The clear coat on the stickers can get hazy.
    yes the big stickers on the side of the boat. I can live with it. Just was checking to see if anyone on here had that happen and was able to clean it
    721 ​ProXp


  7. Member
    Join Date
    Aug 2009
    Location
    Dover, Ohio
    Posts
    5,341
    #7
    Hmmm yeah that is a bit odd. I could see them taking a beating if kept outside...but that is not the case. You have to be careful for sure with whatever you wipe them with since vinyl can be sensitive.

  8. Member
    Join Date
    Nov 2007
    Location
    Republic, MO
    Posts
    2,915
    #8
    You might try a bit of CLR 50/50 with distilled water on a cloth and see if it works. That is what I use on my rig for water stains.

  9. Member jdupre's Avatar
    Join Date
    Apr 2012
    Location
    Bourg, Louisiana
    Posts
    1,710
    #9
    Quote Originally Posted by Jig_Man View Post
    You might try a bit of CLR 50/50 with distilled water on a cloth and see if it works. That is what I use on my rig for water stains.
    I’ll give it a try for sure thanks
    721 ​ProXp


  10. Member grayline's Avatar
    Join Date
    Apr 2014
    Location
    Newnan Georgia
    Posts
    5,685
    #10
    I ripped one of mine on a stick up and ordered new ones from Tracker $35 a side

  11. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,459
    #11
    Quote Originally Posted by grayline View Post
    I ripped one of mine on a stick up and ordered new ones from Tracker $35 a side
    $35 wow.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team