Securing bow electronics on phoenix mount

[afdean]

I saw a post awhile back about the hardware a gentleman used to secure the phoenix mount that comes with knobs attaching it. Seemed like a keyed nut or something? Don't want to take off my solix every time I park the boat, but don't want anyone else to take it off either!

[Tom Edwards]

Red keyed lock on the gimble;

One is shown in one of the scrolling pictures on their home page. Open the link, let it sit for a bit, and it'll start scrolling;

https://precisionsonar.com/

called;

The DuraSafe® Universal E-LOCK®
59.95

Sold per pair and keyed alike.

[Tom Edwards]

and on this page, mostly all the way down, on the right side;

https://precisionsonar.com/products/

[Phoenix919]

I believe Ram Mounts also has one called Ram Lock or something like that

[GBhoss]

Red keyed lock on the gimble;

One is shown in one of the scrolling pictures on their home page. Open the link, let it sit for a bit, and it'll start scrolling;

https://precisionsonar.com/

called;

The DuraSafe® Universal E-LOCK®
59.95

Sold per pair and keyed alike.

Been using these for 3+ years and never a problem.

[afdean]

So I have e-locks on the knobs. Phoenix used a bar across the front of the trolling motor recess that attaches with knobs. The whole mount can be removed by hand. Thinking of maybe using an e-lock with a nut to secure that, or just replace with a different mount?

[birdman920]

I like the factory mount " I pull the whole thing off " when I am doing nothing but Flip'n or bedfishing!.. graph & mount just get in the way !