Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25
  1. Member
    Join Date
    Jan 2007
    Location
    Olive Branch MS
    Posts
    246
    #21
    if your front roller came apart you are supporting the boat with the roller which is a no no . If you can't pick up the boat and clear the front roller you need a shim kit from Marine Master.

  2. Member
    Join Date
    Feb 2015
    Location
    North Texas
    Posts
    17
    #22
    my outside port bunk's back support is welded 3/4'' lower than the starboard side. The boat now has a bad spot on the side where its rubbed against the fender. waiting to see what will be done.

  3. Member
    Join Date
    Jan 2014
    Location
    florence, Kentucky
    Posts
    2,251
    #23
    Quote Originally Posted by Burt View Post
    my outside port bunk's back support is welded 3/4'' lower than the starboard side. The boat now has a bad spot on the side where its rubbed against the fender. waiting to see what will be done.
    wow, and you did not notice??? mine are off a bit but like 1/8th inch sloppy mistakes. 3/4 is beyond sloppy
    2014 Phoenix 618
    2014 Mercury ProXS

  4. Member
    Join Date
    Feb 2015
    Location
    North Texas
    Posts
    17
    #24
    I notice it at the dealer, they said it was just set on the trailer a little off, 1st time I load it it would be straight, wrong! I but the boat back in the water & got out a tape measure & found the problem. I shimmed it up, put it already rubbed a spot on the boat.

  5. Member
    Join Date
    Jan 2014
    Location
    florence, Kentucky
    Posts
    2,251
    #25
    Quote Originally Posted by Burt View Post
    I notice it at the dealer, they said it was just set on the trailer a little off, 1st time I load it it would be straight, wrong! I but the boat back in the water & got out a tape measure & found the problem. I shimmed it up, put it already rubbed a spot on the boat.
    Honestly, sounds like typical dealer comment. I don't think they care to know much about fit of trailer to boat. I called mine reporting that I felt I needed excessive power load. The response was it is just a bass boat and this is normal. Turns out my boat has the wrong size trailer or major flaws in build. Mine fixed with no boat damage in year 2 of ownership.
    2014 Phoenix 618
    2014 Mercury ProXS

Page 2 of 2 FirstFirst 12