Want to add tilt and trim at the bow. Can someone tell me what wires I need to use?
There's a Tan, Red, Blue/White and a Green/White.
Also how do I tighten the throttle handle, it's a bit loose.
Thanks in advance for your help.
Want to add tilt and trim at the bow. Can someone tell me what wires I need to use?
There's a Tan, Red, Blue/White and a Green/White.
Also how do I tighten the throttle handle, it's a bit loose.
Thanks in advance for your help.
Don will be along soon.. He will need your serial #
2013 Pre-Johnny Ranger RT 178
115 PRO XS
Due to the increase of ammunition prices... There will be no warning shots
Honda certified Master technician 33 Years
Serial number irrelevant for this situation. Red is the hot and blue/white goes to up trim and green/white goes to down trim. Which throttle box do you have.
pic would be nice ,what year is boat,what shape button in center
.................................................. ...the scariest thing in life is the unknown ...................................
2013 Pre-Johnny Ranger RT 178
115 PRO XS
Due to the increase of ammunition prices... There will be no warning shots
Honda certified Master technician 33 Years
Serial Number is 1B483029.
The button is round.
Last edited by Grizzly; 02-18-2018 at 04:39 AM.
There are a number of possible controls that you might have in your boat (most of which have a round button on them).
A picture will help to identify.
In regards to your original question:
Power (+) will be Red, or Red w/Purple Stripe (in some cases just purple).
UP will be Blue w/white stripe. (or simply blue)
DOWN will be Green w/white stripe. (or simply green).
Hope this helps...
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Anybody have an answer on how to tighten the throttle handle?
brass nut behind button ,push handel forward in N detent pop out button small screw driv be very carefull don't break stem of button
.................................................. ...the scariest thing in life is the unknown ...................................
Looks like I may need to open up the control. No brass nut?
Last edited by Grizzly; 02-15-2018 at 05:43 AM.
what year is boat control, not seen that one, may be aftermarket
.................................................. ...the scariest thing in life is the unknown ...................................
Definitely suspect it's an aftermarket control. Perhaps a wider-angle view showing the entire control/handle?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Control is a 2006 Mercury. Also has the official Mercury logo on the button I popped out. I'll get a picture tonight when I get home.
It looks like a command 3000 or newer ....control i see the trim switch wires inside . Mercury or Quicksilver
Here's the controller.....
YEP that's a merc alright/parts break down shows a bolt coming in from back
.................................................. ...the scariest thing in life is the unknown ...................................
+1... you had us all thinking it was a Panel-Mount control.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
All done.
Took the controller off the mount. Backed the bolt out, added some locktite, tightened it back up.
Remote T&T all hooked up also.
Thanks everyone for your help