I had the question of setback asked of me Too Johnny. Mine measured a perfect 9.5”. Yours probably is the same given the 4” spacer.
I had the question of setback asked of me Too Johnny. Mine measured a perfect 9.5”. Yours probably is the same given the 4” spacer.
The wedge shouldn't count as setback IMO.
Fastbass Marine LLC
We specialize in NEW and USED ALLISON BOATS, Blazer Boats, Platinum Mercury Marine Repower Center, AquaTraction Flooring, and custom marine electronic installations on beautiful Kentucky and Barkley Lakes.
2022 Allison XB-21 BasSport Pro Elite
2022 Mercury 450R
2012 Bullet 21ss
2005 Mercury 300X
https://youtu.be/FOnAGNWOgZ0
Curious why not? When the motor is trimmed thickness of the wedge is setback.
Allison XB21 2+2
Mercury 300R
Last edited by Woody22; 01-29-2018 at 07:58 PM.
My wife has been telling my for years that a half inch wasn't gonna help me none, guess I finally listened.
Johnny Johnson
I tend to agree with you Tim. So I am looking for some edgification. Its a 1/2 inch at the top and 1/16 at the bottom how does that add into the setback measurement.
Matters not trimmed or no trimmed. Engine is still 1/2 inch farther from the boat at the furthest point. I guess if all measurements were taken at neutral trim it would be like 1/2 inch spacer/block. No different than JP with degree.
Last edited by Woody22; 01-29-2018 at 10:35 PM.
John Wolff
2003 Allison XB21 2+2
2003 Mercury 250xs
OK
Makes sense!
Allison XB21 Prosport Mercury Racing 250XS with a 1.75 Sporty