Thread: Sho oil filter

Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    San Marcos, TX
    Posts
    1,299

    Sho oil filter

    Can someone give me the part number for the SHO 250 oil filter. I need to order one but don't have access to my boat.

  2. Member J Risco's Avatar
    Join Date
    Aug 2013
    Location
    Lake Hartwell - Anderson, SC
    Posts
    4,869
    #2
    Should be:

    N26-13440-00-00
    2021 Phoenix 920 Elite / SHO 250
    Bullet 21XD / 250 XB (Gone to a great home in LA)
    "There is no such thing as a bad day fishing!"

  3. Member
    Join Date
    Jan 2012
    Location
    Jackson, Tn.
    Posts
    1,964
    #3
    Number @ Simyamaha: N26-13440-02-00.....Not sure what the difference is in the number posted above this one.....(the 02 part)

  4. Member J Risco's Avatar
    Join Date
    Aug 2013
    Location
    Lake Hartwell - Anderson, SC
    Posts
    4,869
    #4
    2. Basic part number data: XX0-X000X-X0-X0The second group of five digits is the actual parts group identification number (i.e. 11631 -piston; 11311 - cylinder etc.). A «W» substituted in the first position of this five-digit group(000-W0000-00-00) indicates a factory assembled kit which differs in content from the original assembly used in production (i.e. 2M0-W0046-00-00 – Rear Break Pad Ass’y).

    The first three digits of this five-digit group (000-XXX00-00-00)indicates the general sections and areas of the models. The fourth and fifth digits of this group (000-000XX-00-00) indicates the specific part within these general sections and areas. In the case of number overflow, a letter will be substituted in the fifth digit position of this five-digit group (i.e. 1T4-2814A-00-00 – Wire Tool).

    3. Design Code Number Data: XX0-X000X-X0-X0 The ninth and tenth digits of the part number indicates differences, corrections or modifications to the original part number. The ninth digit position (000-00000-X0-00) maybe substituted with a letter. This position indicates variations that may exist within a specific item, i.e. 1J7-12169-A1-00 – Pad Adjust 1J7-12169-E1-00 – Pad Adjust 1J7-12169-F1-00 – Pad Adjust The tenth digit of the part number (000-00000-0X-00) indicates the number of times the design of the part has been changed.

    4. Color or finish Code Data: XX0-X000X-X0-X0The last two digits of the part number will indicate the finish or color of the item if applicable.


    Superseded number, either will work. Not sure if they changed anything (prob did but it was something small). If any Yamaha techs know the answer to what they changed I would appreciate knowing also, thanks!
    2021 Phoenix 920 Elite / SHO 250
    Bullet 21XD / 250 XB (Gone to a great home in LA)
    "There is no such thing as a bad day fishing!"

  5. Member
    Join Date
    Nov 2004
    Location
    San Marcos, TX
    Posts
    1,299
    #5
    Thanks gents

  6. Member
    Join Date
    Jan 2017
    Location
    Louisville, KY
    Posts
    156
    #6
    Quote Originally Posted by J Risco View Post
    Should be:

    N26-13440-00-00
    ths is the right #
    Savage 2016 ZX250/ 250 SHO