Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    HEALDSBURG Ca.
    Posts
    4,865

    Reading the " rock" post below, I have a question.

    How important do you think it is to have the Ss ducer100(+-)% level?
    im thinking it may be more important than I have believed. Thanks for your thoughts.
    BILLY. 1995 202DCX ELITE TEAM FATBOY
    & 2000 tracker PT185
    2015 Fish count
    Days on the Water =5.
    Big fish 1-5.5
    Big fish 2-5.00000
    Big fish 3-4.0
    Big fish 4-3.0smallmouth
    Big fish 5-@2.50

  2.  
  3. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    2,657
    #2
    It is crucial.

  4. Member
    Join Date
    Jul 2013
    Location
    Austin, Tx.
    Posts
    414
    #3
    X2...very important.

  5. Member
    Join Date
    Jul 2015
    Location
    Pulaski, TN
    Posts
    225
    #4
    Would think since it is so crucial that the "top" of transducers be flat so could check with level whole lot easier. Talking about Totalscan, can't remember LSS2 SHAPE

  6. Banned
    Join Date
    Jul 2015
    Location
    Harwick Pa
    Posts
    1,200
    #5
    I dont put a lot in to getting it perfect, just close. The boat is always shifting around anyway.

    I even got nice images from a canoe this past summer.

  7. Member
    Join Date
    Mar 2014
    Location
    Fishers, IN
    Posts
    293
    #6
    i have seen it make a difference on my boat as I thought it was level but when did true check by taking a level out in the boat with me to see the angle of the boat i found out i was wrong. Depending where you have it mounted how you have your motor can make a big difference. If I am doing a lot of side-imaging I will even fill the live well on the passenger side so the boat is level side to side. You can sometime get a good image by not worrying about any of this but if you are going a bunch of money on electronics to see what is down there I am going do everything else I can that is free to do.

  8. Member dean c's Avatar
    Join Date
    Jun 2005
    Location
    Humble Tx.
    Posts
    7,187
    #7
    Any opinions on the transducer shield and saver jackplate mounts as far as level goes? I'm running a totalscan on an atlas.
    2016 Ranger Z521c 250 Mercury Pro XS