Heard " pop"

[Skeeter206]

Was re wiring my stereo system under the console of my 2008 ZX200 and had cut all zip ties to spread out the bundle of wires from the large cable collector/rigging tube and at some point through my project I heard a "pop", which to me meant I had blown a fuse, checked all fuses in the block with ohm meter and all tested good, all lights on panel were lit, but, no courtesy lights, could here the switch "click" when pushed, no lights come on, is there some kind of inline fuse after tge fuse block that Im missing somewhere, or before, just sure sounded like a fuse "pop", to me, checked voltage at power supply and had 12.4 volts near the switch....

[jomo924]

open up the bow panel there might be fuse there inline