FX Props

[Mountainman]

Anybody tried various props on their FX boats? Almost through break-in on my FX21 & was wondering if there was a better prop out there than the T2 for these hulls. Otherwise, I suppose a lil B&B love from Mr Croxton is in order. Thanks in advance.

[Skeeter185]

PM sent

[Jeremy Sanders]

What kind of speed was you getting from the T2? Hopefully getting mine in soon. Dread the break in

[mrlawler1]

Running 74-75 at 6100 just me with an untouched T-2... Not much different for me than the T1 I figured I'd lose some RPM but I didn't..I might once it warms up or I get a partner but I don't expect much loss...

[jgill6816]

What settings is ur j/p on

[mrlawler1]

Bottom of the 5th dot....

[r82ranger]

I have a somewhat related question about the 5 dots. I had a second power pole installed they did not tighten properly and the engine slipped. I don't remember what the dots were before the slip.

Is there a standard setting for the dots on the jack plate for a FX20 T1 prop 250 sho

[bgibson]

Usually it is set at the factory at 7 dots showing. Most run between 5-7 dots.

[Fishfor5]

I recently went from a T1 to a T2. Slung a blade on the T1. Haven't noticed any difference at all in mine.

[mrlawler1]

I recently went from a T1 to a T2. Slung a blade on the T1. Haven't noticed any difference at all in mine.

I kinda sorta killed my T1 on a rock ...prop could've been fixed but the barrel was busted as well and it looked like it had been broken....cracks were not clean...