I bought a new "Fill / Empty / Recirculate" Valves. Now when I go to fill the left side it takes forever to fill everything else works. What did I do wrong?
I bought a new "Fill / Empty / Recirculate" Valves. Now when I go to fill the left side it takes forever to fill everything else works. What did I do wrong?
I sounds like the left side pump isn't working.
"The man of system is apt to be very wise in his own conceit; and is often so enamored with the supposed beauty of his own ideal plan of government that he cannot suffer the smallest deviation from any part of it…He seems to imagine that he can arrange the different members of a great society with as much ease as the hand arranges the different pieces upon a chessboard.” Adam Smith, The Theory of Moral Sentiments
it works just it pumps in very slow...
Oh I when I set it to recir. it does fine. Could it be that the valve is not opening all the way.
Stupid question, because im not familiar with them since mine are broke and im lazy, but are they directional?
They are directional, however, the first question -- you say on recirc it pumps OK. Do you mean it has a strong spray/stream and on "fill" it is slow. Are you saying the stream/spray is slow or the time it takes to fill up is slow. I guess I'm asking is "if" the spray/stream is the same on both fill and recirc?
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
sounds like it may not be opening all the way in the fill position.
I got nothin
I got nothin
I'm sure you've already looked, but make sure the valve is moving when you move the actuator. Sounds like it is stuck in the recirc position. Also make sure you have it placed correctly with the fill side to the hose coming off the transom and you have the cable going in from the correct side. Some valves are for front entry cable and some for rear entry cable. These valves work by using a "flapper" inside to cover the intakes. When in recirc, the recirc side is opened and the fill side is closed, however water pressure on the valve will allow some water inside the resevoir. When in fill, the fill side opens and closes the recirc side. the water pressure coming in is equal to or more than the water pressure on the recirc side so it keeps that valve closed.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
ok will just to dang cold to worry about it right now..