So I have had a leak on the trim for a little while and really need to get it fixed.
Should I have it rebuilt or buy a new one? It was original to the boat an 88. And now it sitting under. A
06 175 optimax.
What are your guys thoughts?
So I have had a leak on the trim for a little while and really need to get it fixed.
Should I have it rebuilt or buy a new one? It was original to the boat an 88. And now it sitting under. A
06 175 optimax.
What are your guys thoughts?
08 Bass Cat Puma 250 Mercury Pro XS 26p Fury
Ultrex 112 HDS 12 Live w/ Active Target on bow HDS Gen 2 on console
Check out my Website for an in depth look. https://www.beardedbassin.com/
Check out my Youtube Channel https://www.youtube.com/c/BeardedBassin and see how I approach the CA Delta
Please see the Forum Announcements, and be sure to provide the REQUIRED info. Thanks!
If you can, please read your post and clarify. Your post reads like you have the same tilt/trim on your 175 Optimax that was on a 1988 engine previously. Not likely the case... can you confirm?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Pasco marine and five star marine both rebuild trim and tilt units. $430.00
Both are located in Florida. Ship it to them and they ship you back your unit completely looking and working like new.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
08 Bass Cat Puma 250 Mercury Pro XS 26p Fury
Ultrex 112 HDS 12 Live w/ Active Target on bow HDS Gen 2 on console
Check out my Website for an in depth look. https://www.beardedbassin.com/
Check out my Youtube Channel https://www.youtube.com/c/BeardedBassin and see how I approach the CA Delta
Sorry Serial is #1B026463
08 Bass Cat Puma 250 Mercury Pro XS 26p Fury
Ultrex 112 HDS 12 Live w/ Active Target on bow HDS Gen 2 on console
Check out my Website for an in depth look. https://www.beardedbassin.com/
Check out my Youtube Channel https://www.youtube.com/c/BeardedBassin and see how I approach the CA Delta
Im not so sure on the 3 wire question.
There are a total of 3 wires from the unit, there Is a double wire that goes to the motor and then one that runs to the ground and appears to be a ground.
I can post pictures after work to confirm
08 Bass Cat Puma 250 Mercury Pro XS 26p Fury
Ultrex 112 HDS 12 Live w/ Active Target on bow HDS Gen 2 on console
Check out my Website for an in depth look. https://www.beardedbassin.com/
Check out my Youtube Channel https://www.youtube.com/c/BeardedBassin and see how I approach the CA Delta
Probably a good idea to post a picture- that serial number would not have used a 3-wire system (though one would physically fit in there, if someone was putting together pieces and parts left over from various motors or something).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Ended up being a two wire system. The 3rd wire was a ground strap that just ran along the other two wires. I ended up finding a shop that rebuilds trim units. Got one out the door shipped for 360$ with a 2 year warranty!
Now just waiting for it to arrive in the mail
08 Bass Cat Puma 250 Mercury Pro XS 26p Fury
Ultrex 112 HDS 12 Live w/ Active Target on bow HDS Gen 2 on console
Check out my Website for an in depth look. https://www.beardedbassin.com/
Check out my Youtube Channel https://www.youtube.com/c/BeardedBassin and see how I approach the CA Delta