Live well drain

[Bullet 250]

I think I know the answer to this but do you have to remove the tank to fix the drain value, I think the cable has come loose. It's still attached to the lever in the live well, thanks

[bigbass56]

Yep. You on the wright track
but replace it with new one
dont try to fix it or you be doing it
again after trips.

[Bullet 250]

I think the cable just came loose, won't know till I get the tank out, needs to get a little warmer too

[21xdc95bullet]

Yep. Re did mine last spring.

[btaash]

let me know what you find out mine is doing the same thing. Seem like the cable came loose. Good thing is it is in the closed position so I just pump it out if I use it.

[crank68]

I keep mine sprayed and lubed up as much as possible...I know at some point it’ll be a problem.

[Bullet 250]

I'll let you know but it might be this weekend before I can get to it

[21xdc95bullet]

I syphoned my gas into gas cans... tank is super easy to get out... thanks to bullet lol then you can sit down and work on it it’s ease.

[Bullet 250]

If you're real small you can, still hard for me and I'm just 5'8"

[21xdc95bullet]

I’m 6’3 and it wasn’t to bad. A lot better than reaching somewhere you can’t see your arm falling asleep lol

[Bullet 250]

I'm with you on that one, it's not too difficult, just a pain

[21xdc95bullet]

Wouldn’t be a real boat if it wasn’t somewhat of a pain lol

[21xdc95bullet]

But why this thread is going... I replaced my valve and everything and like 2 weeks later it quit working too... does anyone else have consistent trouble? I just but a pvc cap and capped my live well off. I can pump it out or unscrew the cap. But just curious