Taking the old Yammer Hammer to the shop. What are some things i should have done. Have had zero issues with this motor. I am the original owner. Can a report be ran with this motor? I have done very little to it. Thanks in advance
Taking the old Yammer Hammer to the shop. What are some things i should have done. Have had zero issues with this motor. I am the original owner. Can a report be ran with this motor? I have done very little to it. Thanks in advance
Filters, all of them. pull and flow test your injectors. Compression test all cylinders. Run diagnostics. Fuel/water separator if you don't already have one. Clean and properly functioning fuel system is the life of your HPDI. I have an '05 series 1 300. No issues yet but I do this service every 100 hrs.
Replaced all filters. Hope it is still as reliable now lol
Silm what were all the filters hey replaced? I just talked to the local yamaha service dealer and I was told there was only 1 filter but that doesnt sound correct to me
Around 14 of em if you count the injector baskets, HP fuel pump baskets, chinese fingercuff strainer and VST and main on board paper filter.
If you use fresh non ethanol fuel you can go 1000 hours on a set of filters
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs