Going to take out my passenger console.Is their any thing I can use to dissolve the glue . So I don/t damage the gel coat. Ranger 519
Going to take out my passenger console.Is their any thing I can use to dissolve the glue . So I don/t damage the gel coat. Ranger 519
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC
Now that we know what the'glue' is. Nothing I know of will desolve epoxy. Best bet to create least damage is a versi-tool or similar oscillating cutting tool. Slow and careful will get you there with least damage.
Speed cost money. How fast ya wanna go? I have done so much for so long with so little. I can now do the impossible with nothing!
man thats the most damage i have seen on a ranger ripping one of the consoles out. looks beautiful all fixed up though. I wish someone would do a removable console conversion. I wouldnt think it would be all that hard, and would definitely be worth it for your passenger in the winter. My wife wont go if its at all cold out because of the wind.
Funny thing is, it popped off real easy. Easy enough that I thought I lucked out with no damage.
Removed the screws, and used some UHMW wedges I had made.
After all is said and done, I love the single console. Well worth it IMO, opened the boat right up.
I was originally going to attempt to make the pass console removable but I liked the single so much I decided that it will never go back in and I sold the console.
Mike
2019 Ranger 520L w/ 250HO ETEC G2
2011 Tracker 175TXW w/ 75HO ETEC