Originally Posted by
1rudebee
I have a manual plate. I"ve raised it about 1.5'' from the original factory setting (which was already a little higher than flush on the plate) and am right at 3'' under pad now. I've only tried my 26 raker ho prop. In my area getting brp hubbed props is very difficult. I have had the prop B&B'd, but the speed gain was minimal. It really only helped the handling slightly. I believe the limiter is at 6000 rpm's, but have never scared it. I'd like to try a 25 and 26 tempest plus or a 4-blade fury or new RX4 brp prop. But, again, props with brp G2 hubs are scarce around here. So, I haven't dropped anymore funds to buy props yet. Not sure that I will because it's already running nicely.