transducer for high speed

[kking]

I am hooking up helix 12 for console with side imaging. I want to be able to use sonar for high speed. If I "y" connect it, can i use it at the same time as the side/down imaging transducer so that it will show sonar, and the other will show DI/SI? Also, which transducer would yall suggest? I am putting a helix 10 on the trolling motor and have the stock transducer that came with it. Would it be sufficiant. Thanks

[Wayne P.]

Yes, what boat?
It makes a difference.

Which one of the 7 versions of Helix 10?

[kking]

Yes, what boat?
It makes a difference.

Which one of the 7 versions of Helix 10?

mega helix. the latest version. The boat is basscat puma

[Wayne P.]

OK, attach the Helix 12 SI transducer to the transom above the bottom of the hull, a jackplate is a good place.
Get the XP 9 20 shoot-thru transducer for the bilge and install it correctly, then attach the SI and 2D to the display with the 9 M SIDB Y cable.

The Humminbird AD MTM mount or the Transducer Shield and Saver TM-HX-1 will attach the MEGA SI transducer to the trolling motor.

[kking]

Thanks for the help Wayne. Rigged this way the sonar uses the shoot through and the di/si uses the one mounted on jackplate correct? I don't have to change them back and forth

[ezfishn]

Thanks for the help Wayne. Rigged this way the sonar uses the shoot through and the di/si uses the one mounted on jackplate correct? I don't have to change them back and forth

That's correct with the y-cable. Imaging and temp comes from the mega transducer and 2D from the shoot-thru transducer

[kking]

Appreciate it!

[Sam Bass]

Hello, I have the non mega 10si, can I use same puck and splitter? Thanks in advance.

[Wayne P.]

Hello, I have the non mega 10si, can I use same puck and splitter? Thanks in advance.

Yes