They match correct? Tried finding in here but most was bout ultrex. Thanks
They match correct? Tried finding in here but most was bout ultrex. Thanks
Phoenix 618
Evinrude ETEC 150
Go Buckeyes
Go Browns
I just replaced my Maxxum Pro 80/42 with a Fortrex 80/45 and all (6) holes lined up perfectly. Good Luck
Yes, they will line up. Below is a picture that I put together showing the hole configuration for Maxxum, Motorguide, Edge, and Fortrex/Ultrex. As you can see, the holes are all lined up in the same place -- except for the Motorguide Gator. The Motorguide Gator does have holes that matches the outside holes of the MinnKota mounts, but there is multiple choices to drill for originally mounting. Getting back on subject however, the MinnKota mounts are all drilled the same.
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
thanks!
Phoenix 618
Evinrude ETEC 150
Go Buckeyes
Go Browns