Everything connected like it says in the manual. 360 on it's own power source and switch. Problem is Helix is not finding the 360. At a loss. Defective 360 or am I missing something? Doing what the manuals says with no luck.
Everything connected like it says in the manual. 360 on it's own power source and switch. Problem is Helix is not finding the 360. At a loss. Defective 360 or am I missing something? Doing what the manuals says with no luck.
It takes a while for the unit to recognize it is connected. It is not instant.
The quickest/fastest way is to power the 360 first and then power the unit a few minutes later---like 360 on, launch, then start the unit when you are ready to leave the ramp.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I've let it set as long as 5 minutes before turning on the helix. I'll give it some more time. Maybe I'm being to inpatient.Originally Posted by Wayne P.
If you are using the Ethernet Switch in your setup, that has to be turned on also.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Reply With Quote