-
Command link gauge wiring
I have a 2008 250 HPDI with the round multifunction command link gauges. I am redoing the wiring for my graphs and accidentally pulled a wire out of butt connected. The wire went to two yellow wires that terminate at the back of the gauges. I then discovered the wire had been cut back in the bilge by a previous owner. I found some info on the web that indicated the yellow wires are used to turn the gauge backlights in when the ignition is turned on. If it is. It connected the gauges are only light whene the navigation lights are turned on. This is how my gauges work now. Is this infact what the yellow wires do?