Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Feb 2013
    Location
    Texarkana tx
    Posts
    121

    Shimano bearing size

    Hello everyone. Can someone tell me the spool bearing sizes I need for a metanium mgl? Also does the curado k use the same size bearings as the e-series? What is the bearing size for knob and worm gear bushing replacement? Thanks

  2. Member
    Join Date
    Jun 2012
    Location
    Guntersville, Alabama
    Posts
    633
    #2
    Metanium MGL takes a 3x10x4 in the side plate and a 5x11x4 on the spool.
    Curado K takes a 3x10x4 in the side plate and under the cast control cap.
    The bearing size for knobs and worm gear is 4x7x2.5

    We have all these available and in stock to ship at The Tackle Trap.

  3. Member
    Join Date
    Feb 2013
    Location
    Texarkana tx
    Posts
    121
    #3
    Ok great thanks. I was just looking at the website and wanted to double check before I ordered.

  4. Member
    Join Date
    Feb 2013
    Location
    Texarkana tx
    Posts
    121
    #4
    Which bearing do you recommend for the knob and worm gear bearing?

  5. Member
    Join Date
    Feb 2013
    Location
    Texarkana tx
    Posts
    121
    #5
    I found them thank you for the help.

  6. Member
    Join Date
    May 2017
    Location
    Possum Kingdom Texas
    Posts
    105
    #6
    Quote Originally Posted by PikeRoadBassn View Post
    Metanium MGL takes a 3x10x4 in the side plate and a 5x11x4 on the spool.
    Curado K takes a 3x10x4 in the side plate and under the cast control cap.
    The bearing size for knobs and worm gear is 4x7x2.5

    We have all these available and in stock to ship at The Tackle Trap.
    To verify, bearing in brake side plate is 3x10x4 and the bearing under cast control tension cap is 5x11x4 for the metanium mgl?

  7. Member
    Join Date
    Oct 2013
    Location
    GA
    Posts
    244
    #7
    These bearing sizes haven't changed for the 150 mgl & 70 mgl correct?