Is anything in the way I'm going to hit when i cut her open??????
Is anything in the way I'm going to hit when i cut her open??????
I have a 96 '18 elite, the only thing I ran into was a pvc pipe on the port side of your cut that has 2 wires in it that I believe went to the bow running lights, just cut through it and splice them together. To be safe if you have a panel on front take it off and see if maybe you can get a light in there and maybe snap a picture with your phone or use a mirror. Don't drop your phone in there!!
Do you a flush mounted graph up front? If so you can remove it to see where the wiring is located and to check if anything is in the way.
I had nothing below the deck of my 181.
I added one to my 2004 188 with no problem. Wide open under deck.
Thank you sir!!!! will probably be doing it this coming weekOriginally Posted by ljl45
Justin take some good pics! I'm doing my 187 this winter
Best to talk with someone with your model. Different models may have differing layouts....
Reply With Quote
