I rented a home on grand lake. It was at least 150 yards to the boat in the slip. I bought a bunch of standard cords from wally world and strung them to the boat. Three days, no issues. On board two bank charger.
I rented a home on grand lake. It was at least 150 yards to the boat in the slip. I bought a bunch of standard cords from wally world and strung them to the boat. Three days, no issues. On board two bank charger.
Danny Head
Hinton, Oklahoma
2015 Ranger RT 188, Mercury 115 4 stroke
Given the issues that have been raised here, I went back over the list of properties I am considering and eliminated any that would involve a really long run. I think I should be able to get withing 150 to 200 feet if not shorter. I am going to drive to the lake next weekend and pace some of them off to see just how far they are.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
I'll be blunt.
Agree with Cat Fan.
Real world advice here.
12-3 would easily be fine to run a measly 3amp draw device for up to 400 feet from a 120 volt outlet.
However, why not DO IT RIGHT and direct bury a 10-3 to the dock and be done with it. Buying 400 ft of 12-3 SJ cord would more than pay for the 10-3 direct bury. Just get some labor to get it buried.
If it's over solid rock and can't be buried, then go overhead with appropriate wire.
Then you could run any 120 volt device you could imagine at the dock, including a 140 amp mig welder.
Good Lord, I wouldn't even begin to let this simpleton issue influence what property I would buy.
This is not a slam , just a wake up call.
Last edited by LOSTTEXAN; 12-03-2017 at 10:34 PM.
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs
Whatever you do PLEASE DO NOT HALFASS IT!
ANYTHING DOWN BY THE WATER NEEDS GFCI PROTECTION!!
http://www.al.com/news/huntsville/index.ssf/2017/04/what_is_electric_shock_drownin.html
If that's rated to work between 110-120v your good but if rated to operate at 120v and you only have 115v, which is probably less than that if you do not have 120v at the source, you stand a good chance of cooking your charger.
If that rental home is on with other homes on the lake they will affect volatge too when frig/freezers, AC etc kick on and could put you way less than the min operating voltage(brown out) of the charger thus cooking it..
Good thing, to do it correctly at 400' your looking at a 24" deep trench with greater than 4/0 wire and at that point I'm calling the power company to set a transformer from the pole and I would tap off that to supply the homeower power at the desired location which would be quite pricey...
Most of the latest chargers are able to handle the voltage drop, especially switching chargers vs. Linear chargers. Which very few these days are linear chargers (due to weight of the transformer).
This same voltage drop condition occurs all the time at motels before a tournament. And for the most part todays chargers handle it well!
Some manufactures of chargers even point this out to get you to purchase there charger.
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs
Last edited by LOSTTEXAN; 12-06-2017 at 10:22 PM.
You Don't Know what you Don't Know until you Know.
1984 Champion 201/Yamaha 175
1986 Ranger 390v/Yamaha 200
2002 Viper Cobra Coosa 216/Mercury 225EFI
2002 ProSports ProKat 2200/Twin Yamaha 150HPDIs
I was able to visit the lake and check out the properties first hand. Of course the one with an outlet right at water's edge doesn't appeal to my wife. There are a couple of others that have an outlet about 120 feet to the water. Add some for getting out to the stern of the boat and I am coming in at less than 150'.
According to the MinnKota table for my charger I need 14 AWG for 100' and 12 AWG for 150'. Everything I have is 14/3. I guess I'll have to suck it up and get a 150' 12/3 cord.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
If you are not going to plug it into a GFCI plug at the house you might think about getting one of those GFCIs for extension cords. I think that they are around $20.
And I know this may sound a little stupid but I got to thinking and some equipment rental places rent extension cords which might be something to look into if this is a one time thing. First rental place I looked up on Google has a 100ft #12 for 10/week. If you are only going to be gone for a week it might be a cost effective option. Buy a 50ft that you might actually use for something else later and just rent a 100 footer.
Just throwing it out.
I have the same charger and have been using two 12/3 100’ extension cords when I stay at the lake and haven’t had any problems. I use a gfi at the electrical outlet at camp site.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
I work for a stage lighting company. I will have to see if we have 150' 12/3 cables. I'm pretty sure the longest length might be 100' for Edison and 150' for 12/3 L620 cables. A/V companies call them Edison cables, Film and television folks call them Stingers.
We sell used cables. www.4Wall.com or www.usedlighting.com They can ship to you or probably transfer them to our shop in Lititz PA for pick up.