Best Way to get power to New Graph

[mattfish11]

On my RangerRT188..

I currently have 1 HDS 7 at the console - looking to add another HDS 7 to the console with a Precision Sonar Mount (dual units above steering wheel). I have the power run for 1 of the HDS units but I'm looking for tips on the best way to run power for the second unit.

Where I the easiest place to tap into power? There are a bunch of wires behind the console, just trying to figure out the best way to go...

[stratos284]

Seems to me on my 178 there is a terminal bar located under the console

[Wayne P.]

The BEST way is to install a dedicated fuse panel and connect your electronics to it. Don't use the boat's wiring harness at all.

[Lowerider58]

Seems to me on my 178 there is a terminal bar located under the console

Same on my Triton 18TX and its fed with a 6 guage cables from the battery.

[mattfish11]

Same on my Triton 18TX and its fed with a 6 guage cables from the battery.

Yep - found it... I just had to do some hunting for an open terminal with constant power... I should be good to go. Thanks guys!