Currently have a CMC powerlift 5.5” Jackplate. I have 2 12’ talons and trying to figure out if Jackplate mounts are possible or if I have to get sandwich style plates? Thanks Coach
Currently have a CMC powerlift 5.5” Jackplate. I have 2 12’ talons and trying to figure out if Jackplate mounts are possible or if I have to get sandwich style plates? Thanks Coach
Don’t see how you can…The bushings and slide cutout will take up to much room to mount the jackplate bracket. If you have an older CMC with the outside pump I don’t think you will be able to mount one on the port side at all...even with the sandwich mount.
Thanks! Thinking I’m gonna bite the bullet and get a different JP. Coach
I don't remember the bolt size on the Powerlift, but if it's 1/2" bolts (3/4" head), it will / should mount. You will remove the bolts, one side at a time and replace with the bolts that come with the Talon.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]
I have a 13 yr old CMC 5.5" manual jack plate and the side bolts are 3/4". The Talon bracket holes are 1/2". I had to install a sandwich bracket.
Scott Inman