Results 1 to 2 of 2
  1. #1
    Georgia Fishing Reports Moderator
    Join Date
    Jun 2004
    Location
    Springfield, GA
    Posts
    11,750

    Livewell controls

    Been having a few issues with my livewells and think maybe I need to change out valves and the control. I had the valves changed out a few years ago and it appears that what are in there now are the V2. I am wondering if I should have the V3 series instead? As my current control / actuator reads "Empty/ Recirc / Auto". If I do go to the V3 will my valves match up to the existing controls?

    https://flow-rite.com/products/marine/valves/mv-03-fn01

    If I switch over to a new control the one available reads "Recirc / Empty / Auto"
    I assume that will match up with the V3 valve placements?

    Also the screw holes in the new control appears to be at center9 and 3 where my existing seems to be at 10 and 2 positions. Is there any out there that would match available?

    Lastly what brand pumps are you using? Attwood Tsunami or maybe Mayfair?

    I hope that all of this makes sense.

  2. Georgia Fishing Reports Moderator
    Join Date
    Jun 2004
    Location
    Springfield, GA
    Posts
    11,750
    #2
    Sorry I duplicated. If someone can delete this one or the other...