Bought new electronics for the boat. Before pulling old transducer off wanted to know a good way to seal the screw holes on a tin boat, Triton 18TX.
Bought new electronics for the boat. Before pulling old transducer off wanted to know a good way to seal the screw holes on a tin boat, Triton 18TX.
Wettin hooks and huntin fish.
Silcone
3M 5200, it is permanent and won’t break down like silicone.
Sillycone leaves residue you can really only get off with acetone, is a temporary fix. What AndyNegus94 said or 4200 if you need to remove later ! If you want forever use fiberglass resin, and microfiber, as long as there is no moisture !
Why not get some gel and fix it correctly...
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
A good welding shop could fix it right.....
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Tig weld the holes at a welding shop or JB weld yourself.
Bill
3m 5200 and put the bolts back in to fill the holes