Page 6 of 10 FirstFirst ... 45678 ... LastLast
Results 101 to 120 of 197
  1. Member
    Join Date
    Aug 2013
    Location
    Columbia Illinois
    Posts
    67
    #101
    The only problem I had was the holes needed to be moved closer together. As the unit is being deployed the distance between the holes increases.
    There by over extending the strut length. I had to shorten the distance between the holes by 3/8" to 1/2". It wasn't much but now it works great.
    Unlock and deploy the unit, check the distance between the holes over about the first 10" of the lift from the stowed position. Other then that
    the instructions where great.

  2. Member CastingCall's Avatar
    Join Date
    May 2012
    Location
    MN
    Posts
    5,058
    #102
    Quote Originally Posted by Bill Reynolds View Post
    Casting-Call,
    Thanks for the test and information. Would you mind performing the scale test with just one spring attached?
    I did not experiment as much as I would have liked, because I installed an Ultrex. I changed the bow mount on my MAXXUM to a Fortrex bow mount so I can attach it to the Ultrex Bracket with a single bolt, providing a quick change spare.
    Sorry for the delay. I edited my post #95 above to include the force measurements with only 1 strut installed.

  3. Member
    Join Date
    Oct 2009
    Location
    Meridian, MS
    Posts
    763
    #103
    this is a must have add-on,,,,info in pfd file was spot on,,,,thanks BILL

  4. Member
    Join Date
    Oct 2011
    Location
    Harleyville, S.C.
    Posts
    2
    #104
    Just saw your post. Know it was 2 years ago but would still have the PDF? Thanks Twilliams1@homesc.com

  5. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #105
    Quote Originally Posted by stratos285xldc View Post
    Just saw your post. Know it was 2 years ago but would still have the PDF? Thanks Twilliams1@homesc.com
    Just emailed the PDF. Hope you find it helpful.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  6. Member
    Join Date
    Aug 2007
    Location
    Acworth
    Posts
    754
    #106
    Mr. Bill can you please send me the PDF the website will not let me download it. Thanks. 62863kingfish@gmail.com

  7. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #107
    Quote Originally Posted by 4fishlips View Post
    Mr. Bill can you please send me the PDF the website will not let me download it. Thanks. 62863kingfish@gmail.com
    Just sent by email. Hope it works out for you.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  8. Member Dantzx190's Avatar
    Join Date
    Feb 2014
    Location
    Egg Harbor Twp. N.J
    Posts
    500
    #108
    Could you please email me the pdf
    nitrodan69@aol.com
    thanks
    2018 zx 190
    150 v-max sho

  9. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #109
    Quote Originally Posted by Dantzx190 View Post
    Could you please email me the pdf
    nitrodan69@aol.com
    thanks
    Just sent by email.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  10. Member
    Join Date
    Dec 2006
    Location
    Tinley Park, IL
    Posts
    122
    #110
    TTT

  11. Member
    Join Date
    Apr 2019
    Location
    Temple, TX
    Posts
    3
    #111
    Hi guys, got the pdf, did it, works great, I am a good carpenter but never worked with metal. Job was simple...took my time and got it done in 45 minutes. Thanks Bill!!!

  12. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #112
    Quote Originally Posted by Christopher 1111 View Post
    Hi guys, got the pdf, did it, works great, I am a good carpenter but never worked with metal. Job was simple...took my time and got it done in 45 minutes. Thanks Bill!!!
    You are welcome. Glad I could help.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  13. Member
    Join Date
    Aug 2012
    Location
    Oxford,MS
    Posts
    212
    #113
    Mr. Reynolds, please email your lift assist plans to me at dbris1@yahoo.com. Thanks for your willingness to share and help so many of us BBC members.

  14. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #114
    Email sent. Good Luck. Let me know if I can help.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  15. Member
    Join Date
    Apr 2018
    Location
    Not to far from Clarks Hill Lake
    Posts
    470
    #115
    Quote Originally Posted by Bill Reynolds View Post
    I posted some information on this previously but have recently created a PDF giving parts list and complete installation instructions. I have not figured out how to post an attachment to the forum, but if you PM your email address, I will be happy to send you the PDF. Total installed cost of this project is under $30 if you have a 5/16-18 tap and correct tap drill size. If not you can buy the tap and drill in kit form at Lowes for about $8.00.


    Just sent a PM with email. Thanks for sharing.
    1995 Skeeter 200ZX, 1998 Mercury 200 (OG724176)
    2015 Ram 3500 dually Cummins G56
    The Bible

  16. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #116
    Quote Originally Posted by .44mag View Post
    Just sent a PM with email. Thanks for sharing.
    PDF sent via email. Good Luck.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  17. Member
    Join Date
    Apr 2018
    Location
    Not to far from Clarks Hill Lake
    Posts
    470
    #117
    Quote Originally Posted by Bill Reynolds View Post
    PDF sent via email. Good Luck.
    Got it thank you again.
    1995 Skeeter 200ZX, 1998 Mercury 200 (OG724176)
    2015 Ram 3500 dually Cummins G56
    The Bible

  18. Member
    Join Date
    Apr 2016
    Location
    Glasgow, PA
    Posts
    567
    #118
    Could u send pdf to, jaywagner13@gmail.com . Thank you!

  19. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,849
    #119
    Quote Originally Posted by Jwags13 View Post
    Could u send pdf to, jaywagner13@gmail.com . Thank you!
    Sent this afternoon. Good Luck, hope it works for you.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  20. Member BalsaBee's Avatar
    Join Date
    Mar 2005
    Location
    Kimberling City, MO
    Posts
    2,733
    #120
    PDF to kellywallace38@gmail.com Thanks!

Page 6 of 10 FirstFirst ... 45678 ... LastLast