Bill would you sent the PDF to sketvtx@gmail.com. Thank you
Bill would you sent the PDF to sketvtx@gmail.com. Thank you
2016 Skeeter Tzx190 Yamaha 175 SHO
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
I put this mod a 101 mnn kota and it worked great .
Thanks bob
Please send to Bierhorst@hotmail.com
Thanks so much..
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Bill Reynolds would you please send me this file stratos274@gmail.com
Bill please send file to stratos274@gmail.com
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Sent PM request for file.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Completed this mod on a Maxxum 101 a few weeks ago and finally got to use it this past weekend. WORKS AMAZINGLY WELL. A must do mod for those that haven't. It almost lifts itself out of the water!!..
Thanks, glad it worked out for you. I have sent almost 100 PDF’S By email and don’t know how many more were downloaded from my website. For those that don’t know, you can view and download the build sheet by clicking on this link:
https://www.amazon.com/clouddrive/sh...YAt5c9rlVLAZsF
Last edited by Bill Reynolds; 12-12-2018 at 07:22 AM.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Thanks Bill for the information.
Last edited by terminal eagle; 03-13-2019 at 11:15 AM.
I would also like file. If you have time. Please send to mcgrizzly660@gmail.thanks
I installed a pair of the gas springs on my Maxxum yesterday. I ordered the same shocks Bill listed, but went with longer threaded ball studs - and I only added one washer to each ball stud - there wasn't really any clearance issues where the studs needed to extend out any further, that I can see.
I did some quick checking with my spring scale before and after install.
Before: With the motor deployed, it took 50 lbs. of force to lift the motor up, which tapered off to around 38 lbs. at apogee - then back up to around 45 lbs. (to keep mount from slamming to stow position).
After: Initially takes same 50 lbs. tug, but the springs boost the motor up and force tapers off quickly to around 20 lbs. at apogee, then around 34 lbs. to stow. Going from stow to deploy is even easier - with the bonus of not slamming down when deploying with the gas shocks.
Note: With only one strut attached, effort was around 28 lbs. at apogee, and about 38 lbs. to stow.
I've wanted to do something like this for over 6 years... Thanks Bill for the great parts list and instructions!!
Last edited by CastingCall; 04-18-2019 at 07:18 PM.
Casting-Call,
Thanks for the test and information. Would you mind performing the scale test with just one spring attached?
I did not experiment as much as I would have liked, because I installed an Ultrex. I changed the bow mount on my MAXXUM to a Fortrex bow mount so I can attach it to the Ultrex Bracket with a single bolt, providing a quick change spare.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Anyone have similar instructions for MotorGuide?
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching
Could you sent the file to mrfishs@gmail.com.
Thanks JIM