Looking to upgrade the Fortrex 112 to a Ultrex 112 52" on my 2014 ZX20 - does the bolt pattern match up or do I need to drill another set of holes?
Also - any issues that you guys came across installing or using lately??
Thanks !!
Looking to upgrade the Fortrex 112 to a Ultrex 112 52" on my 2014 ZX20 - does the bolt pattern match up or do I need to drill another set of holes?
Also - any issues that you guys came across installing or using lately??
Thanks !!
The pattern is the same but your cover might not fit.
I took my fortex off and installed the Ultrex , holes all lined up perfect , my travel cover fits if I stow the prop in towards the boat but wont fit if turned the other way ?? thank goodness for that , but have heard when you order new covers tell them you have a ultrex , The Ultrex is best thing since Choc & peanut butter
I have a 15 zx250 and took off the Fortrex and installed an Ultrex. Bolt holes are exactly the same. I had a 52" Fortrex and went to a 45" Ultrex, that being said Skeeter boat cover fit PERFECT
I was having the same issue with the 52", always adjusted up and in the way. I am very glad I went with the 45" looks better and not in the way! I fish offshore on a few lakes and it has not been a problem not having the extra length in waves, I'm not fishing the great lakes so its perfect!
I was having the same issue with the 52", always adjusted up and in the way. I am very glad I went with the 45" looks better and not in the way! I fish offshore on a few lakes and it has not been a problem not having the extra length in waves, I'm not fishing the great lakes so its perfect!
I fish some pretty skinny water and hardly ever have to adjust the head up on my 20i - and I had the 52" Ultrex. I had a 45" shaft Fortrex and anytime the wind picked up I spent half the day with my motor out of the water - the 52 was the best upgrade I made to that boat.
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
[QUOTE=Meleagris1;8842761]I fish some pretty skinny water and hardly ever have to adjust the head up on my 20i - and I had the 52" Ultrex. I had a 45" shaft Fortrex and anytime the wind picked up I spent half the day with my motor out of the water - the 52 was the best upgrade I made to that boat.[/QUO
Not sure how you fish skinny water without pulling up your 52" shaft, unless your definition of "skinny water" is 5 ft deep.
Decisions ........ I fish a lot on Champlain, Oneida and some Lake Ontario... 45" or 52" ???
So is everyone saying the factory cover will not fit the 52"?
Thanks !!
[QUOTE=bgibson;8843787]I was fishing a tournament on a tidal river this past weekend and was in 20” of water with the 52” Ultrex about 3” from being all the way down. A number of things play into this - boat brand and legth - also if I weighed 300lbs and had BPS in my front compartments it would be a different story.
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
I have a '15 FX20 and fish Erie and St. Clair. Upgraded from 52" Fortrex to 52" Ultrex. Fits holes, tight stretch on cover, but fits. You can always adjust 52" shallower, but can't stretch the 48". If you have a 360, find a good cover maker- impossible to put under factory cover.
I put a 52" Ultrex on my ZX225 and haven't adjusted it one time. And the 52" comes in handy when spot locked and two people fishing off the back deck.
________________________________________________
2024 Phoenix 21 XE - Mercury 250 PRO XS Serial #3B429919
2017 Phoenix PHX 21 - Yamaha 250 SHO
2010 Skeeter 20i - Yamaha 250 SHO
1988 Procraft 1780 Competitor - Mercury 100
Will the new pedal for the ultrex fit in a ZX20 tray??
Yes