Early Model Skeeter Bow Replacement Panels

[rkylake]

Here's some before & after pics from Lynn H. from Texas of an upgrade he did using a Precision Sonar Bow Replacement Panel and Bow Mount Sonar Bracket.

Nice touch adding the Skeeter Decal.

[bwp777]

very well done. I have the 09 iclass and replaced the bow panel with the factory for $100 but the panel does not match the area of which to attach the screws. it looked like a last resort sorta thing from the factory. not very impressed with the skeeter R&D team on that 1

[Meleagris1]

On my 2010 20i I always wanted to cut out the raised fiberglass portion on the bow and just put a flat diamond plate cover up there - hard wire the TM and put the trim switch on it. Would give you a great place to step getting off the boat

[gitzit26]

[BttrBn]

How much for one of those? I have the exact same factory bow plate and would like to replace it.

[hookbender]

Wish someone made console replacement.

[skeeterJim]

Jim Boswell on Facebook makes replacement panels. https://www.facebook.com/jim.boswell.9

[ifishinxs]

I made one out of 3/16 plexiglass and applied traction tape over the top. Looks and works fantastic. $15.00 total cost.

[rkylake]

more pics comimg

[djmartin4582]

Jim Boswell made my panel (posted pic in the skeeter bling thread months ago). He put in a cup holder and a pliers holder for mine. He also made me a panel for the console where the factory lowrance was. Very pleased with both panels.

Found pics on computer still, here is the end result bow panel.

[I.P. Freely]

Wish someone made console replacement.

Yep! I went to my local Skeeter dealer to get another cover for my console since the one I have now is cracked where the screws go. They called Skeeter and part is no longer available!

[Neilslure]

Could that plate be made with a second switch cut out?

[rkylake]

Could that plate be made with a second switch cut out?

You can use your existing plate as a template to mark the second opening and easily cut it out using a hack saw blade.