Results 1 to 4 of 4
  1. #1
    Marty Donlea
    Join Date
    Oct 2012
    Location
    Firestone,Colorado
    Posts
    317

    How to change out a Glove box Door

    Does anyone know how to remove and take apart the glove box door on a 496 charger? I see the screws on the hinge but don't know how to get to the inside to remove them?

  2. Banned
    Join Date
    Jul 2016
    Location
    Skiatook, Oklahoma
    Posts
    7,952
    #2
    The easiest way I found short of going and buying tools is to take a multi-tool(screw driver with interchangeable bits) find the correct bit and a small pair of vise grips to turn it with. Abut one or two turns and most will come out with your fingers.

  3. Banned
    Join Date
    Jul 2016
    Location
    Skiatook, Oklahoma
    Posts
    7,952
    #3
    If it is one of those that the door covers the screws take a small diameter punch and tap the rod out of the center of the hinges to get the door out of the way.

  4. Marty Donlea
    Join Date
    Oct 2012
    Location
    Firestone,Colorado
    Posts
    317
    #4
    It is the one that the door does cover the screws.. Thanks..