Guy's I've got two Bravo 1's, both 26P. The one with the std. blade profile is a BBlades Bravo 1 26P Labbed (small insert in the photo. The mystery profile (big photo) is oneI bought one off Ebay and it runs an honest 4MPH faster than the labbed one. Anyone seen this cut before, I'd really appreciate some info on it as I'm like'n it allot.
Thanks
Gary
Growing old is inevitable, growing up is optional.......
S.W. Ohio
That was probably done by the propeller guy in Florida that Eli uses.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
And who might that guy be.......name or business name please. ThxOriginally Posted by 21XDC
Gary
Growing old is inevitable, growing up is optional.......
S.W. Ohio
I can't remember, I have it saved on my computer at home. I ran one and it was the fastest bravo one I ever ran.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
If you could, please forward that info to me sometime in the near future.
Gary
Growing old is inevitable, growing up is optional.......
S.W. Ohio
That's a cut to take bow lift out of it...which is amazing considering that prop already has a flared barrel which also does that...no cup either! I would guess that prop is for a very light comp or super comp Bullet (600-800lb 20 footer). I've seen round ear choppers cut similar to that before...they (prop guys) actually call it a bullet cut when metal is taken off the backside like that. Should be a very fast prop on a light Bullet...
Last edited by Bullet 20cc; 10-21-2017 at 03:27 PM.
96 Bullet 20cc, Yamaha OX 250+, 10" jack, labbed 30" Bravo LH w/1.25" exhaust pipes, counter rotating Bob's lower, it goes faster when you spin it the other way...
My memory tells me it was Frank and Jimmie's prop shop.
http://fjprop.com/page/FJ_Racing/27/4/
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Gary what's the weight of your hull?
It ain't no fish'n boat:
2003 Velocity Powerboat 496HO BBC/26 FT Bravo 1X Drive/1.5R
Gary
Growing old is inevitable, growing up is optional.......
S.W. Ohio
I knew that, but my point was to counter this previous comment made..........
I would guess that prop is for a very light comp or super comp Bullet (600-800lb 20 footer
Wow...it's amazing how the same Bravo prop works so well on your style of boat (originally made for them) and on my style of boat at the same time and even without making any changes to the blades. My best Bravo came off a twin engine 900+hp cat and it was absolutely perfect for my boat...just needed vents for the holeshot. Got me thinkin about sending one of my spare Bravos to Frank and Jimmy and let them do it to it. Never would say "no thanks" to another 4 mph...It ain't no fish'n boat
96 Bullet 20cc, Yamaha OX 250+, 10" jack, labbed 30" Bravo LH w/1.25" exhaust pipes, counter rotating Bob's lower, it goes faster when you spin it the other way...
And you are very good at that!
96 Bullet 20cc, Yamaha OX 250+, 10" jack, labbed 30" Bravo LH w/1.25" exhaust pipes, counter rotating Bob's lower, it goes faster when you spin it the other way...
Reply With Quote
.jpg)
