Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jul 2010
    Location
    St. Martin,MS
    Posts
    828

    MG brute 12/24 to tour 24

    I am going from a 12/24 to a tour 24 volt. My question is can I put a three prong plug on the tour or do I need to change my boat to a two prong?

    Rivers

  2. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,089
    #2
    You can use the same plug. Just be sure you are on the right two pins.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  3. Member
    Join Date
    Jul 2010
    Location
    St. Martin,MS
    Posts
    828
    #3
    That was my thought. But wanted to be sure. Thanks Cat. Also, I wont lose anything with it still being wired 12/24 in the back will I?


    Rivers

  4. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,089
    #4
    Quote Originally Posted by Rivers27 View Post
    That was my thought. But wanted to be sure. Thanks Cat. Also, I wont lose anything with it still being wired 12/24 in the back will I?


    Rivers
    If the jumper is at the back, no issue at all. Might want to unhook the 12V wire.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  5. Member
    Join Date
    Jul 2010
    Location
    St. Martin,MS
    Posts
    828
    #5
    Also my assumption. Thank you, sir.


    Rivers