I have a 1996 Viper Cobra 201. The dash board is cracking and falling apart. I also need to replace the live well valves, cables, and actuators. I'm finding it hard to find these parts since they don't make these boats anymore. If anyone has any suggestions it would be very much appreciated. Thanks.
Not sure about the dash, but the livewell parts can be found at www.flow-rite.com
Thanks for the info.
COBRA96 CHECK YOUR PM I CAN GET YOU FIXED UP ON THE DASH AND BOW PANELS
Can you PM the same info. Im new hereOriginally Posted by DD22
I'm pretty certain he lost his connections to get the dash and bow panels. I bought some from him several years back, maybe 7-8 years back. I contacted him on another forum and he told me that he had sold them all.
You might reach out to Carlton Beach / Beach Customs on here and FB. He 3D prints panels for the Champion guys. He may can help you out if it's not too big. He'll need your old one for a pattern, so try to keep it in one piece.
View Profile: BeachCustoms - BBC Boards
Beach Customs | Facebook
Here's an option for you maybe. I found some vinyl wrap that looks like carbon fiber. It's sticky on one side and can be molded nicely with a heat gun or hair dryer. I did my bow panel last year and will do the dash sometime in the future.
IMG_0658.JPGIMG_0660.JPG
Tom
Did you make a new panel or wrap this on the exsisting panel?Here's an option for you maybe. I found some vinyl wrap that looks like carbon fiber. It's sticky on one side and can be molded nicely with a heat gun or hair dryer. I did my bow panel last year and will do the dash sometime in the future.
IMG_0658.JPGIMG_0660.JPG
Tom
I wrapped the existing one. I didn't fill the old holes, just pulled the vinyl nice and tight.
Tom
Reply With Quote