#2b090964, need to remove motor. What should I use to cap off fuel and oil entrances. Hoses I plan on folding over and pinching shut. Will due a oil prime sequence once back together.
#2b090964, need to remove motor. What should I use to cap off fuel and oil entrances. Hoses I plan on folding over and pinching shut. Will due a oil prime sequence once back together.
not sure.
Last edited by Hardhead1; 10-13-2017 at 06:33 PM.
Rubber or Vinyl Caps. 1/4" for oil line, 5/16" for fuel line.
If you fold a hose over like that, you will need to trim it back beyond the "fold", or REPLACE the hose to prevent premature failure.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
