Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Nov 2011
    Location
    Chesapeake Va
    Posts
    184

    97 202 p2p height

    Almost done with the new transom and had a new 8” slidemaster put on. Forgot to measure my p2p height before I took it to the fiberglass guy. Boat ran awesome before all this happened running a 25 trophy at 73mph. Would like to squeeeze a few mph out now that I can change props and adjust plate. What’s y’all thoughts. Oh and it’s a 225 efi 3.0l

  2. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,543
    #2
    Probably going to end up somewhere between 3-3 1/2 PTP. A worked 26 tempest would get you a couple more mph.

  3. Member MMosher's Avatar
    Join Date
    Aug 2009
    Location
    Bout 50 miles West of St. Louis
    Posts
    6,158
    #3
    ^This

  4. Member
    Join Date
    Nov 2011
    Location
    Chesapeake Va
    Posts
    184
    #4
    How do the fury’s match against the tempest. I used to set up a lot of bass cats and always had better luck with the fury’s. Thoughts? Also been eyeing the new 4 blade fury

  5. Member
    Join Date
    Mar 2013
    Location
    High Ridge Missouri 63049
    Posts
    2,543
    #5
    The tempest is tried & true. The fury is a roll of the dice.

  6. The Kairos Lures Guy Fidgetcranker's Avatar
    Join Date
    Sep 2013
    Location
    Cincinnati, Ohio
    Posts
    3,049
    #6
    Use a worked Fury on my 1999 202 with 200 merc efi and it's like 3 mph faster.
    Went from 25 tempest+ to 24 fury. Both worked by Croxton.

    With the 225 efi you're probably good with a Tempest