Thread: Fury props

Results 1 to 4 of 4
  1. #1
    Member Ken Jester's Avatar
    Join Date
    Feb 2014
    Location
    PA
    Posts
    379

    Fury props

    Running a 24 3 blade fury, looking to get 4 blade for better hole shot. Any suggestion greatly appreciated .

  2. Member Slick Rick's Avatar
    Join Date
    May 2010
    Location
    Perdido, AL
    Posts
    318
    #2
    I run a 25 Fury 4 and the hole shot is maybe a little better but the 4 blade is a little slower on top end but handles much much better. What made the biggest difference on my boat was a foil from Chris Bailey, it is the way to go on the V20
    Ricky Rutherford
    2017 Legend V20
    2017 250 Pro XS

  3. Member
    Join Date
    Jul 2013
    Location
    Indianapolis Indiana
    Posts
    631
    #3
    Send you 3 blade to Propeller Dynamics to have addl vent holes added and blue printed and your hole shot will be improved.

  4. Member
    Join Date
    May 2015
    Location
    Broadway, Va
    Posts
    464
    #4
    Bassm1n is correct. I did on water testing with Robert Patterson from propeller dynamics using my V20. With 24p 3 blade fury that was worked plus addition of holeshot plate I get 2-4 second holeshot and 72mph wot. Most of the fury blades are bad from the factory. He will add little more cupping to get it to ride higher and add a few 3/8 vent holes. We also found that with my V20 that it likes the jackplate set 4 1/4" below pad.