Results 1 to 3 of 3
  1. #1
    Member luke1wcu's Avatar
    Join Date
    Feb 2009
    Location
    Raleigh, NC
    Posts
    1,833

    Transducer splitter cable

    I have an Echomap Chirp 74dv with a GT23M-TM that I want to mount in my 18' Parker CC. I'd like to be able to get depth readings on plane but am afraid that might not happen. Is there a cord that I can use to run both the GT23M and a GT15M-IH that I can use to get depth readings at higher speeds? I was able to do this with my old humminbird si unit and wondering if I can do this with my Garmin.

    I realize that I could just use the GT15M-IH alone but as I understand it, that transducer won't allow me to get the down imaging.


  2. Member Todd Driscoll's Avatar
    Join Date
    Jun 2007
    Location
    Sam Rayburn
    Posts
    2,868
    #2
    No, the dv units are not compatible with the y-cable/GT30/inhull 2D combo.
    Garmin Pro Team

  3. Member luke1wcu's Avatar
    Join Date
    Feb 2009
    Location
    Raleigh, NC
    Posts
    1,833
    #3
    Thanks, hopefully I can get this installed in a place where I won't lose bottom readings.