Plugs for seat pedestal bases?

[Ray Co. Hank]

Thanks bud!

[va floater]

I too have Hanks plugs. They are some of the best you'll find.

[fishin couillon]

Got my plugs in from Hank today!!! They look good and are easier to remove than the cheaper plastic ones.....i had purchased 2 from the Phoenix website when i got the boat, had one flyout, not sure how it worked itself out of the hole......great addition to boat.....

[Bigdawgbass]

I have Hanks also.

[Phoenix Jim]

When my boat comes I will get some from hank as well. Little confused though, does the boat come without plugs which may may not cause leaking in compartments or are they just plain with no design so folks get better ones? Thanks

[DREWTICK]

comes with a couple of plastic ones, Hanks are much better

[dstep0]

I'm guessing Hank's metal version prevents the chance of them popping/flying out of the holes? I've lost a few plastic plugs along the way.

[Jeff from Iowa]

none of them are going to fly out

I have the delrin solid ones and they are really hard to get out, Im thinking of drill and tap so I can screw a bolt in to remove them or go back to the plastic ones the boat came with. I go back and forth on using a seat or not

[DREWTICK]

I keep one of these in the center box to remove the plugs

[fishin couillon]

^^^^ Thats a great idea........got several in my junk box, will have to dig one out....

[dstep0]

none of them are going to fly out

I have the delrin solid ones and they are really hard to get out, Im thinking of drill and tap so I can screw a bolt in to remove them or go back to the plastic ones the boat came with. I go back and forth on using a seat or not

Plastic ones for sure fly out....
Unless you're talking about metal, which I'm hoping wouldn't.

[Phoenix Jim]

comes with a couple of plastic ones, Hanks are much better

ok thanks

[Rangerdawg]

If you keep the plastic ones just ring them with electric tape...they wont fly out then...

[txbass1]

Received mine this week from Hank and put the decals on. They are awesome

[Ray Co. Hank]

Make sure to keep them clean or dirt and debris can cause them to be tighter than they should be coming out. A quick wipe down with bbs while your doing the boat does the trick. Also, make sure the hole is clear and your not installing the plug along with a few carpet fibers.

Hank

[TX721]

I too ordered and received Hank’s plugs. Perfectly machined and a quality product! 100% better than the ones from Phoenix.

Thanks Hank!

[Fidgetcranker]

Got mine a week ago. Thanks Hank, beautiful plugs!

[marty92xrd]

Rays are the deal!!

[CNR]

PM me the link please!

[txbass1]

Just message "Ray Co. Hank" above