I just got a HDS Gen 3 12" and a 9" what mounting brackets do y'all suggest using?
Thank in advance for a response!
I just got a HDS Gen 3 12" and a 9" what mounting brackets do y'all suggest using?
Thank in advance for a response!
Im a balzout guy myself. They hold a big screen at 100 which is more than the others can say
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Thank you I will check them out
Alli, where do you buy the ballsout? I need to pu my 1198 at the console. Will the base fit in the trough?
The base fits the same hole pattern as a ram. I bought mine at a local tackle shop for the same price as the website
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Its aluminum so i think you could grind it to fit in the trough
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
They make a rectangle base to fit in the troft as well as the round base.
I want my 12 up front and I have ny 9 set on the back can't decide on the front because I want it up an inch or 2 but not really high off the deck if possible
http://www.bbcboards.net/showthread.php?t=850300
check this out
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Bullet 21xrd Mercury 300xs
I put my 12 up front on the floor because I thought I would use it more than the 9 that's under the windshield, I had them reversed on my 2004 Bullet I had
At some point I want to have some type of wedge put the the steering because the wheel doesn't tilt enough downward it will tilt up so far it's like driving a big truck.
Bullet 21xrd Mercury 300xs
I put a tilt wheel on mine
Get a tilt helm from bullet then get a deep dish wheel or spacer kit
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
i have the tilt wheel it just doesn't tilt down enough for some reason it will tilt way up
Bullet 21xrd Mercury 300xs
Kyle08,
Is your boat steering wheel a little hard to turn, going down the lake?
Need to watch putting the 12 up front. Tim Powell did and at on point had problems controlling the boat at speeds. My depth finder are mounted
under windshield and behind the trolling motor and on the floor.
Yes the steering is a little hard at times
Bullet 21xrd Mercury 300xs
Balzout makes a bullet base for mounting at the console, the round one would not fit on my 20XD.